A-A-54417
The waistband shall be of sufficient length to fit a waistline of 48 inches or less. All exposed edges of the pouch shall be clean finished or shall have binding. Suspensories shall be comfortable, shall be capable of multiple launderings and shall be suitable in all respects for their intended purpose. The use shall be capable of urinating without removing the suspensory. Suspensories shall be free of ravelings.
Workmanship. The suspensories shall be free from defects which detract from their appearance or impair their serviceability.
Unit. Package (PG). One package containing 12 scrotal suspensories of one size and type only, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Sampling for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105 and as specified herein. The unit of product for examination shall be the one suspensory in an immediate container. Sampling shall be Inspection level II with an acceptable quality level (AQL) 2.5 (percent defective).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business