A-A-54193
The soft plastic sheet shall run the full length and width of the pad and shall be fastened in place. The side of the pad opposite the patient side shall have a pressure sensitive adhesive strip(s) which shall run almost the entire length of the pad on the outside of the pad. The adhesive strip(s) shall hold the pad securely in place during use and the pads shall be easily detached for disposal. The adhesive area shall be protected by an easily removable paper facing.
The finished pad shall be non-irritating and shall be adhering to skin, sutures or to the surgical site. Both ends of the finished pad shall be rounded. The finished pad shall not ravel, tear or bunch during use. The finished pad shall have a minimum weight of 24 grams and the pad shall absorb a minimum of 8 times its weight of water.
Workmanship. The pad shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Package (PG). Fifteen pads shall be packaged in a bag capable of maintaining cleanliness of the pads. Each pad shall be supplied in a plastic disposal bag, or, as an alternate, 15 plastic disposal bags shall be included with the pads. One package containing 12 bags of 15 pads each (180 pads), as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business